9
10
sharkclean .com
CLEANING THE BRUSHROLL
1
To open the brushroll garage, slide both release buttons
on the floor nozzle away from you, towards the back of the
nozzle, then lift off the lid.
2
Clear away any objects or debris.
3
To close the brushroll garage, insert the 3 tabs on top of
lid into the 3 slots in the nozzle, then push down on both
sides of lid until it clicks securely into place.
If Brushroll
Indicator Light isn’t green and headlights are flashing,
check again that both sides of lid are locked in place.
NOZZLE MAINTENANCE
Zero-M
™
Technology
DuoClean® Technology
CLEANING THE SOFT ROLLER
1
To remove Soft Roller from nozzle, lift it out
by the pull tab.
2
Tap loose debris off the Soft Roller. Use a
dry towel to wipe the Soft Roller clean, or
to remove any debris caught in the teeth
behind the Soft Roller.
3
Hand wash the Soft Roller as needed. Use
only water, and let air-dry completely for at
least 24 hours.
4
Reinsert Soft Roller under rubber bumper in
front of nozzle until it clicks into place.
CHECKING THE NOZZLE FOR BLOCKAGES
1
Tilt neck of nozzle back to straighten the
airway, then remove any blockages.
TIP:
You can also check
for blockages in the hose
and tubes. Just remove
the floor nozzle, dust cup,
and hose and shine a
flashlight in the openings.
STEP 1
STEP 2
Zero-M Technology™ actively removes hair wrap from your
brushroll while you vacuum, with uncompromised cleaning
power. If you run over a hard or sharp object or notice a noise
change while vacuuming, check for blockages or objects
caught in the brushroll.
NOTE:
Do not be alarmed if there is visible hair at any given
time, as it will eventually make its way to the dust cup.
DuoClean Technology features a bristle brush to deep-clean
carpets, and an additional soft brushroll to pull in larger
particles and directly engage floors for a polished look. With
normal use, you may need to perform routine maintenance of
your Soft Roller. See the instructions below.
™