background image

NOTE:

 To order replacement parts and filters, visit 

sharkclean.eu

.

Replacement Pre-Motor Filter  

and Frame

Replacement Post-Motor filter

Perform maintenance on your Post-Motor Filter once a year to keep your vacuum's suction power optimal.
IMPORTANT: 

Rinse 

Post-Motor Filter 

with lukewarm water 

ONLY

DO NOT

 use soap. Allow to air-dry for at least  

24 hours before reinstalling. 

DO NOT

 scrub 

Post-Motor Filter.

Follow the previous instructions for removing filters. The 

Foam Filter

 should be replaced every  

2.5 years, and the 

Post-Motor Filter

 should be replaced every 3 years, subject to frequency of use.

MAINTENANCE

CLEANING POST-MOTOR FILTER 

(ONCE A YEAR)

REPLACING FILTERS

1.

   Pull up on 

Post-Motor Filter

 access tab to 

remove.

2.

   Rinse filter with lukewarm water ONLY and leave 

to air-dry at least 24 hours before reinstalling.

3.

   When dry, reinsert 

Post-Motor Filter

 and press 

down until it clicks into place.

Note:

 Battery must be removed before 

Post-Motor 

Filter 

can be removed.

P

u

ll t

o

 A

cc

es

s F

ilt

er

Post-Motor 

Filter

1.

   Slide  down 

filter door

 release button.

2.

   Tilt filter door and lift off.

3.

   Remove filter from pod. Pull off foam filter.

4.

   Rinse foam filter and filter frame with lukewarm  

water 

ONLY

 and leave to air-dry for at least  

24 hours before reinstalling.

5.

   Once completely dry, reinsert foam filter on  

filter frame.

6.

   Holding the pull tabs, push the filter back  

into the pod.

7.

   Reinsert bottom of filter door into slots on  

pod. Tilt door to close, pressing until it clicks 

into place.

Perform regular maintenance on your filters to keep your vacuum's suction power optimal. 
IMPORTANT:

 To prevent damage, rinse filters with lukewarm water 

ONLY

DO NOT

 use soap. Allow filters 

to air-dry for at least 24 hours before replacing them in the vacuum to prevent liquid from being drawn into 

electric parts.

MAINTENANCE

CLEANING PRE-MOTOR FILTER 

(ONCE A MONTH)

Clean

Filte

rs

Mont

hly

Filter  

Frame

Foam 

Filter

Filter  

Door

Your vacuum comes equipped with three filters located on the vacuum pod: two Pre-Motor Filters  

(one is a filter frame) and one Post-Motor Filter to capture and trap dust and debris.

13

sharkclean .eu

12

sharkclean .eu

Содержание Anti Hair Wrap & DuoClean with Powered Lift-Away ICZ160UK Series














Отзывы: