SHARE 102S PRO V2, Руководство пользователя, Страница: 8 / 20

4
2. Installation
2.1Camera Introduction
The SHARE 102S PRO V2 has an TFT display on the front. When installing the camera, ensure
that the display is aligned with the aircraft nose. The lens near the front of the camera is the
back-view, and the drive letter is named after the lens Angle orientation, which is opposite to
the lens mounting position.
The top of the camera is equipped with DJI SkyPort 2.0 interface, which is compatible with
DJI M300 RTK. There are 4 M3 threaded holes at the bottom of the camera to connect the
fixed mount between camera and drone.
The camera also has a 15 Pin Connector which integrates power supply, triggering, hot
shoe , serial port and other functions.
Pic 1 Camera interface
1. Display Screen
2. Skyport 2.0 Interface
3. The wind hole
4. Type-C Interface
5. Camera Cable Interface
6. Through-hole Damping Ball Connector× 4
7. Set Screws × 4 8. Rubber Damping Ball × 4
9.Threaded Hole Damping Ball Connector ×4