Shanghai High-Flying Electronics HF-SH01, Руководство пользователя

Страница: 59 / 74

High-Flying
Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
- 59 -
+ok=<status><CR>< LF ><CR>< LF >
 Set Operation
AT+ NTPEN=<status><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters:
 status ： status of time calibration
 on ： Enable time calibration

off ： Disable time calibration
4.2.2.62. AT+NTPTM
 Function: Query network time
 Format:
 Query Operation
AT+ NTPTM<CR>
+ok=<time><CR>< LF ><CR>< LF >
 Parameters:
 time
：
networ time, for example: 2013-10-9 16:10:42 Wed
，
if it shows Not
Available means that the time calibration function is not enabled or the module
doesn’t connect to the internet.
4.2.2.63. AT+WRMID
 Function: Set module ID;
 Format:
 Set Operation
AT+ WRMID=<wrmid> <CR>< LF ><CR>< LF >
 Parameters:
 wrmid: set module’s ID (within 20 characters).
4.2.2.64. AT+RLDEN
 Function: Set/Query GPIO45 function status
 Format:
 Query Operation
AT+RLDEN<CR>
+ok=<status><CR>< LF ><CR>< LF >
 Set Operation
AT+RLDEN=<status><CR>
+ok<CR>< LF ><CR>< LF >

Parameters:

status: The status of module’s GPIO45(nReload) function

on: GPIO45 function (nReload) is enabled.

off: GPIO45 function is disabled
4.2.2.65. AT+ASWD
 Function: Set/Query WiFi Configuration Password;
HF-SH01