background image

*

**

LED’s 

work

A

BRAND

SHADA

WEEE NL: 3505

WEEE DE: 37281017

WEEE AT: 40133

Imported by

Kanaal Noord 350

NL-7323 AM Apeldoorn

www.shada.nl

20161027

300194

300195

300196

30

50

80

230V / 50 Hz - 130mA

230V / 50 Hz - 217mA

230V / 50 Hz - 348mA

>0,95

2.250

3.750

5.600

75

70

4.000

Neutral White

15.000

15.000x

120°

<2s

L 225 x B 60 x H 185

L 285 x B 78 x H 235

L 425 X B 110 X H 325

L 300 x W 245 x H 375

L 360 x W 310 x H 360

L 540 X B 400 X H490

Ra>70

A

230V direct drive LED PCB

2835 SMD (84x)

2835 SMD (140x)

2835 SMD (240x)

IP65

No

5m,  H07RN-F 2x1,0mm²

CEE 7/7 - IP44

-20°C ≤T ≤40°C

Aluminium powder coated

Impact resistant polycarbonate

Specifications 

Art Nr.

Power (W):
Input voltage (V AC):
Power factor
Luminous flux (lm):
Lumen/W
Color temperature (K):
Color description
Lifespan(h):
Switching cycles (on/off):
Beam angle:
Warm up-time (95%):
Dimensions LED construction lamp(mm):
Dimensions Rack(mm):
Colour rendering index (CRI):
Energy class:
Driver:
LED type:
Protection class IP:
Dimmable
Cable type:
Plug type
Working temperature (T °C):
Housing:
Protective window:

Packaging contents

1x LED Construction lamp

1x manual

General safety instructions 

Please read the operating instructions for the LED Construction 

lamp before use. The operating instructions are part of the 

product. They contain important notes on start-up and handling 

of the device. Always keep the enclosed operating instructions so 

as to be able to look up information. They must be enclosed when 

passing the device on to third parties.

Safety precautions 

The user must observe the safety notes and warnings in order 

to maintain this status and to ensure safe operation. Please 

read the operating instructions before start up.

Never attempt to open the device, the LED Construction lamp 

cannot be repaired; this part must be immediately disposed 

in case of a defect. Ensure sufficient ventilation of the device. 

Never cover it during operation. Do not install in reach of 

children or animals. 

Any other use of the device than described can damage the 

product or endanger the user due to e. g. short-circuits, fire 

or an electric shock. The entire product may not be modified 

or adapted. 

These safety notes must be observed in all cases! Any 

warranty claim is void in the case of damages caused by 

non-observance of these operating instructions. We are not 

liable for consequential damages or for damages to property 

or persons caused by non-observance of the safety notes and 

improper operation of the device.

Safe operation is not possible anymore, if:

- the LED Construction lamp has visible damages,

- the LED Construction lamp does not work anymore

Safety notes

LED-lights are extremely bright. Under no circumstances look 

into the light beam of the LED Construction lamp, as this may 

cause permanent damage to your eyes.

*If the window is broken,

it has to be replaced with a new original protective window of 

impact resistant polycarbonate before further use.

**FIRE HAZARD!

Fit the light so that it is at least 1 m away from the material to 

be illuminated. Excessive heat can result in a fire.

RISK OF INJURY FROM BURNS!

Ensure the light has been switched off and allowed to cool 

before you touch it.

To prevent hazards,

a damaged flexible outer lead of this light may only be exch-

anged by the manufacturer, his service representative or 

by an equally qualified specialist.

Attention:

To prevent hazards, a damaged flexi-

ble outer lead of this light may only 

be exchanged by the manufacturer, 

his service representative or by an 

equally qualified specialist.

Notes:

•  Please ensure a safe and firm surface for the LED construc-

tion lamp to stand on.

•  Please ensure that the cable is not getting squashed or 

otherwise damaged.

•  The LED construction lamp with carrier can be adjusted 

continuously within the swivelling range.

•  Plug is

 IP44

GB 

Installation and Operating Manual

Notes on Disposal 

Old units, marked with the symbol as illustra-

ted, may not be disposed of in the household 

rubbish.

You must take them to a collection point for 

old units (enquire at your local authority) 

or the dealer from whom you bought them. 

These agencies will ensure environmentally friendly disposal.

Care and warranty 

Before cleaning the unit, disconnect it if necessary from other 

components; do not use aggressive cleaning agents.

The unit has been carefully checked for defects. If nevertheless 

you do have cause for complaint, please go back to the retailer 

where you have bought the product together with your proof 

of purchase. The warranty for manufacturing faults runs for 1 

year from the date of purchase. It excludes any compensation 

for installation and other costs. The dealer or manufacturer 

can change this guide at any time and without prior notice.

Visit us online at www.shada.nl for more information about 

our products and our company.

CE declaration

This product is according next directives:

2014/35/EU

2014/30/EU

2011/65/EU

Additionally, for Products with Radio transmitter units:

R&TTE 2014/53/EU

The complete Declaration of Conformity Document (DOC) can 

be found here: http://www.shada.nl/uploads/DoCs/index.

html

Protection

Class II

Отзывы: