PAGE 3
PAGE 2
SPECIFICATION
MODEL No
STCC400
TRAY DEPTH
75mm
WHEELS
100mm
DIMENSIONS
785mm x 420mm x 885mm
CAPACITY
158kg
WARNING
Read and understand instructions before use.
Always wear eye/face and hand protection when
assembling the tool cart.
Assemble only according to these instructions. Improper
assembly can create hazards.
WARNING
1. Wear approved safety goggles and heavy‑duty work gloves during as‑
sembly.
2. Keep assembly area clean and well lit.
3. Keep bystanders out of the area during assembly.
4. Do not assemble when tired or when under the influence of alcohol,
drugs or medication.
5. Weight capacity and other product capabilities apply to properly and
completely assembled product only.
6. Do not ride or climb on cart. Use as intended only.
7. This product is not a toy.
8. Do not allow children to play with or near this item.
9. Do not exceed 8 kg capacity, evenly distributed.
10. Be aware of dynamic loading! Sudden load movement may briefly cre‑
ate excess load causing product failure.
11. Use only on a flat, level surface able to support Cart and load.
12. Inspect before every use; do not use if parts are loose or damaged.
13. Maintain product labels and nameplates.
WWW.SGS-ENGINEERING.COM
