PAGE 8
- Make sure the chain and sprocket are correctly adjusted
before operating the pruner. Never attempt chain
adjustment with the engine running!
• Always make sure the cutting attachment
is properly installed and firmly tightened before operation.
• Never use a cracked or warped guide bar: replace it
with a serviceable one and make sure it fits properly.
• If a saw blade should bind fast in a cut, shut off the
engine immediately. Push the branch or tree to ease the
bind and free the blade.
• Do not operate the pole pruner with the muffler removed.
• When cutting a limb that is under tension, be alert for springback
so that you will not be struck by the moving
limb.
• Always stop the engine immediately and check for damage if you
strike a foreign object or if the machine becomes tangled.
Do not operate with broken or damaged equipment.
• Do not make unauthorized modifications or substitutions to
the guide bar or chain.
• Never allow the engine to run at high RPM without a load.
Doing so could damage the engine.
• Keep the pruner as clean as possible.
FOR SAFE OPERATION
IMPORTANT
WWW.SGS-ENGINEERING.COM
CALL FOR ASSISTANCE:
01332 576 850
