PAGE 17
SET UP
1. Remove the plastic cap on the end of the tube.
2. Remove the screw.
3. Insert the end of the tube into the gear case, and make sure
to align the transmission shaft of the tube with the transmission
shaft of the gear case.
4. Line up the hole on the tube with the hole on the gear case
and insert the screw through the hole and tighten firmly.
ATTACHING THE PRUNING MECHANISM
Attachment tube
Bolt hole
Fastening bolt
Bolt
Gear case
1. Remove the plastic cap on the end of the tube.
2. Remove the bolt.
3. Insert the end of the tube into the gear case, make sure to
align the transmission shaft of the tube with the transmission
shaft of the gear case.
4. Line up the hole on the tube with the hole on the gear
case and insert the bolt through the hole and tighten firmly.
5. Using a wrench, screw in the fastening bolt provided to fix
the mechanism into place.
