PAGE 13
PAGE 12
1. The compressor is controlled by a pressure switch. It can be stopped
automatically as the pressure increases to the maximum and restarted
as pressure decreases to the minimum. The rated pressure has been
adjusted during the manufacturing process - don’t alter it carelessly.
PRESSURE ADJUSTMENT
THERMAL RESET SWITCH
This compressor has a thermal overload device.
If the motor gets too hot, the thermal overload device cuts the power
which prevents damage to the motor.
If the thermal overload device operates, let the motor cool down for 5
minutes and push the reset button.
If you start the compressor and the overload cutout operates again, stop
the compressor and disconnect from the power supply and have your
compressor examined by a qualified service agent.
WWW.SGS-ENGINEERING.COM
