PAGE 9
PAGE 8
ASSEMBLY
- Use a spanner to attach the wheels to the compressor.
- Use the washers and spring washer in the positions shown.
Insert the support foot
into the position shown.
WWW.SGS-ENGINEERING.COM
PREPARATION FOR STARTING
1. Check all nuts and bolts.
Make sure all loosened parts
are tightened before starting.
2. Before running the compres-
sor remove the white plug and
connect the red bung in it’s
place. (2.)
3. Screw the air filter in before
starting the compressor. (3.)
4. Set the compressor in a clean,
dry and ventilated area.
5. Keep voltage within ±4%
of the rated value.
3
2
