SGS SAT402, Руководство пользователя, Страница: 3 / 11

PAGE 3
SAFETY INSTRUCTIONS
1. Read and understand tool labels and manual.
Failure to follow
warnings could result in DEATH or SERIOUS INJURY.
2. Operator and others in work area MUST wear safety glasses.
3. Keep fingers AWAY from trigger
when not driving fasteners to
avoid accidental firing.
4. Never point tool at any part of your body or others.
5. Never use oxygen or other bottled gasses.
Explosion and
serious personal injury could result.
6. Wear ear protection to safe-guard against possible hearing
loss.
7. Use clean, dry, regulated, compressed air at 75 to 100 PSI
.
8. Only use air hose that is rated for a maximum working pressure
of at least 150 PSI or 150% of the maximum system pressure,
which ever is greater.
9. Disconnect tool from air supply hose
before performing tool
maintenance, clearing a jammed fastener, leaving work area,
moving tool to another location or handing the tool to another
person.
10. Never use tool if
safety, trigger or springs are inoperable,
missing or damaged. Do not alter or remove safety, trigger or
springs. Make daily inspections for free movement of trigger
and safety mechanism.
11. Connect tool to air supply before loading fasteners
to prevent
a fastener from being fired during connection.
12. Operator and bystanders to wear helmets
to safeguard
against injuries.
13. Do not load fasteners with trigger or safety depressed
to
prevent unintentional firing of a fastener.
14. Do not drive fasteners close to the edge of the work-piece.
The work-piece is likely to split allowing the fasteners to fly free
or ricochet.
15. Fire fasteners into work-piece only - never into materials
too hard to penetrate. Do not drive fasteners on top of other
fasteners, or with the tool at too steep an angle; the fasteners
can ricochet causing personal injury.
16. Always carry a fastener-driving tool using only the handgrip
and never with the trigger actuated. Never carry the tool by the
hose or pull the hose to move the tool.