12
Configuring the device for programming
The SGM Network Admin tool is used for setting up the VPL's for programming and real time monitoring.
SGM Network Admin tool
The SGM Network Admin software is available for free at: www.sgmlight.com. For further informations see the SGM Network
Admin manual, or contact SGM support at [email protected]
Sensors
Four sensors can be monitored through the SGM Network Admin software:
•
Main temperature
•
LED temperature
•
LED voltage
•
FPS (frame per second)
Protocols
The VPLs operate via Artnet or Streaming ACN. The internal protocol for VPLs is SGM VP-Net which have a bandwidth limit of
100Mb.
Lenses
The direct view of the VPLs can be modified with snap-on lenses.
Opal Black
Smoked
Clear (No Lens)
Opal
With no lens attached,
the VPL shows well
defined pixels.
Smoked lenses will
appear all black when
the VPL is turned off.
The opal black lens the
diffuses light, while the
black frames remove
undesired light spill.
Diffuse lens with an
increased viewing
angle
1
2
1
2
Step 1
Insert the power/data and ensure that it
is connected properly by hearing the click
sound on insertion. Confirm the alignment
of the arrows .
Step 2
Click the VPL into the brackets with the
oblong hole first and the single one after.
Tighten the bolts after installation.
Replacing
