background image

6

Safety information

The TLD-612A is intended for professional use only. It is not suitable for household use. 

Review the following safety precautions carefully before installing or operating the device.

 

Preventing electric shock 

• 

Do not open the device; there are no user-serviceable parts inside.

• 

Ensure that power is cut off when wiring the device to the AC mains supply.

• 

Ensure that the device is electrically connected to earth (ground).

• 

Do not apply power if the device is in any way damaged. 

• 

Do not immerse the 

¿

xture in water or liquid. 

• 

Use only a source of AC power that complies with local building and electrical codes and has both overload and  
earth leakage protection.

• 

1

ever attempt to bypass the fuse. Always have defective fuses replaced with ones of the speci

¿

ed type and rating.

• 

Verify that the power feed cable is rated for the total current draw of all daisy-chained products.

 

DANGER!  Risk of electric shock. Do not open the device.

WARNING!

 Read the safety precautions in this section before

 installing, powering or operating this product.

Содержание TLD-612A

























Отзывы: