SGM TLD-612A, Руководство пользователя

Страница: 11 / 24

11
Rigging the TLD-612A
The TLD-612A may be installed in any orientation.
Before installing TLD-612As at elevation, ensure that the
• Attachment hardware is in good condition and designed to support at least 10 times the ¿ xture ¶ s weight.
• Structure can support at least 10 times the weight of all installed ¿ xtures.
• Work area below is blocked from public access and make sure the work is performed from a stable platform.
When using more than one TLD-612A to create an LED curtain, ensure that the TLD-612As are installed so that the
correct pixel pitch can be achieved.
To rig a TLD-612A
1. Loosen the mounting brackets and slide the brackets to the
desired length (no less than 160 mm and no more than 500 mm
apart)
2. Turn the thumb screws fully clockwise until the bracket is locked
in place.
3. When using more than one TLD-612A to form a wider LED curtain,
WARNING! Always secure an elevated TLD-612A with a safety cable as backup
Min. 160 mm Max. 500 mm