background image

22

Accessories

The i-5 Series can be used with various accessories such as barndoors, color frame, 

and anti-glare shields. 

To get to know all the available i-5 Series accessories, see www.sgmlight.com, or con

-

tact your local SGM dealer.

Accessory holder

The Accessory holder is a mandatory base for holding Barndoors and Color frames to 

the i-5 Series fixture. It is a clip-on accessory that includes a safety wire to be attached 

to the bracket of the fixture, and a knob on the side to allow the sliding of barndoors, 

color frames or rigid diffusion filters.

Barndoors

The i-5 Series have 4-way and 8-way barndoors. The 

difference between the two types is that the 8-way 

barndoors  give  an  extra  control  when  cutting  the 

light, by extending the width of the eight adjustable 

flaps.

The barndoors are designed and intended to be 

mounted on the fixture without the use of any tools. 

It is only required the use of the accessory holder, 

where the barndoors will slide and fit in, by releasing 

the locking knob in the side of the accessory holder. 
The  i-5  Series  barndoors  are  also  compatible  with 

the use of color frame and diffusion filters. 

Floorstand

The i-5 Series have available an optional floorstand, ideal when there is a frequent 

need of changing the position of the fixture between hanging and standing. 
The i-5 floorstand it is easy to mount or remove, simply by the use of 1/4 turn fas

-

teners.

PLEASE NOTE!!

The accessory holder, the barndoors and the floorstand are not intended for permanent outdoor installations.

Anti-glare shields

The i-5 Series feature two different types of optional anti-glare shields:

•  Full anti-glare shield 

- covers the full fixture’s opening 

•  Half anti-glare shield

 - covers half of the fixture’s opening

Using the anti glare shields will remove any unwanted discomfortable glare and reflections.
The anti glare shields are easily mounted by removing the two tilt lock bolts, one in each side of the fixture. Refit the anti glare shield 

in position and screw both tilt locks bolts again. 

Note: This accessory is suitable for both permanent outdoor and indoor installations.

Figure 22: i-5 Series Barndoors

Figure 24: i-5 Series Anti-glare shields

Figure 23: i-5 Series Floorstand

Figure 21: i-5 Series Accessory holder

Содержание I-SERIES





























Отзывы: