SGM I-2 BLUE POI, Руководство пользователя, Страница: 14 / 24

14
Level 1 Level 2 Level 3 Level 4 Function
MODE Select Mode - - Use the arrows to select DMX mode.
INFO Product Type - - Display product type.
Firmware Version - - Display installed firmware version.
Serial Number - - Display fixture’s serial number.
RDM ID - - Display fixture’s RDM ID. (Unique RDM ID for identification).
DMX View - - Display received DMX channels.
Temperatures - - Display temperatures (mainboard, left, center and right LED panel).
Power on time - - Display fixture total power on time.
LED On Time - - Display LED total power on time. (R, G, B, W).
Log - - Display recorded operation data and error codes.
SETTINGS Startup Mode Select Startup Mode DMX
Standalone
Quickcolor Default operating mode when fixture is powered on: 1. DMX (factory default)
2. Stand-alone
3. Quick Color
Startup Program 1 → 3 Stand-alone program 1, 2 or 3.
Only used if the startup mode is set to “stand-alone”. Program 1 is default.
Flip Display Enable / Disable - Flips the display up-site down when enabled.
Display Saver Display DIM - Dims OLED display when control panel is not in use.
Display OFF - Turns off OLED display when control panel is not in use.
Fan Mode Standard -
Silent -
Max Power -
LED Frequency Default frequency - Set the fixture to default frequency.
Custom Freq. - Use the arrows to select a custom frequency.
Minimum Values White 1 -12 Set minimum values for individual LED panels. Use the arrows to set the value and
enter to change the panel.
Factory Default - Reset the fixture to factory default settings. See “Factory defaults” on page 12.
Service Pin Enter service pin to access service menu.
Service Menu Product Type -
Calibration Info -
PSU Voltage z -
PWM Out -
MANUAL Quick Color Dimmer NA
Stop program - - Stops current running internal sequence or Quick Color.
Editor Program 1 → 3 Select program to edit (1, 2 or 3).
Scene 1 → 24 Select program to edit (1-24).
Dimmer 0 → 255 Set the dimmer value.
Shutter 0 → 255 Blackout (0-7); Open (8-15); Variable Strobe (16-151); Pulso Open (152-175); Pulse
Close (175-199); Variable Random Strobe (200-244); Open (245-255)
Fade time (minutes) 0 → 511 Set fade-in (transition) time to current scene in min. (0-511).
Fade time (seconds) 0 → 59 Set fade-in (transition) time to current scene in sec. (0-59).
Wait time (minutes) 0 → 998 Set waiting (static) time in current scene in min. (0-998).
Wait time (seconds) 0 → 59 Set waiting (static) time in current scene in sec. (0-59).
TEST Selftest - Initiates a self-test sequence.
Display Test - Show multiple test patterns
LED Test - Test the light source. Each panel is tested separately, use the arrows to cycle
through the panels.
Q-2 W Control menu