12
Level 1
Level 2
Level 3
Function
Mode
Select Mode
-
Select DMX mode
Info
Product Type
-
Displays product type
Firmware Version
-
Displays installed firmware version
Serial Number
-
Displays SGM serial#
RDM ID
-
Displays RDM ID. (Unique RDM ID for identification )
DMX View
Up to 504 DMX addresses
Displays received DMX levels
Temperatures
Mainboard
Displays
fixture temperatures
LED Left
LED Right
Humidity head
Fan Left RPM
Fan Right RPM
Wireless signal
Wireless paired
Light pwn
Humidity base
Base
Power on time
-
Displays fixture total power on time
LED On Time
-
Displays LED total power on time. (R, G, B, W)
Errors
-
Displays error codes
Settings
Wireless DMX
Wireless log off
Sends Log off command to the CRMX System
Signal strength
Displays strength of the wireless connection
Startup Mode
Select Startup Mode
Default operating mode when fixture is powered on: 1. DMX (factory default)
2. Stand-alone
3. Quick Color
Startup Program
Stand-alone program 1, 2 or 3.
Only used if the startup mode is set to “stand-alone”. Program 1 is default.
Flip Display
Disable
Selects normal control panel display.
Enable
Flips control panel display.
Display Saver
Display Off
Turns off the OLED display when the control panel is not in use.
Display Dim
Dims the OLED display when the control panel is not in use.
Fan Mode
Standard
Adjust fan speed relative to internal fixture temperature.
Silent
Low fan speed for quiet operation.
Max Power
High fan speed for maximum cooling effect.
Factory Default
-
Reset the fixture to factory default settings.
Manual
Quick Color
Red
Static quick color - red mix (0-255). Sets fixture to quick color startup mode.
Green
Static quick color - green mix (0-255). Sets fixture to quick color startup mode.
Blue
Static quick color - blue mix (0-255). Sets fixture to quick color startup mode.
Run Program
1, 2 or 3
Runs internal sequence 1,2 or 3.
Stop Program
-
Stops current running internal sequence or Quick Color.
Editor
Program
Currently selected program (1, 2 or 3).
Scene
Currently selected scene (1-24).
Red
Red value in currently selected scene (0-255).
Green
Green value in currently selected scene (0-255).
Blue
Blue value in currently selected scene (0-255).
Shutter
Shutter setting in currently selected scene (0-255). (According to latest DMX chart)
Fade Time (Min.)
Fade-in (transition) time to current scene in min. (0-511).
Fade Time (Sec.)
Fade-in (transition) time to current scene in sec. (0-59).
Wait Time (Min.)
Wait (static) time in current scene in min. (0-998).
Wait Time (Sec.)
Wait (static) time in current scene in sec. (0-59).
Test
Off
-
Stops test sequence execution.
Automated Test
-
Initiates a self-test sequence.
Display Test
-
Service use only.
Control menu
