PTU15
Electrical Connections
SWING connections
No special cable or coax-cable are requests, and no
practice distance limits.
For the Vdc power supply take in consideration that the
negative of the power supply is electrically connected to
the negative output current.
A special J-box with P1 and P2 calibration push buttons
built-in is available on request.
The picture below shows the connectors and the push-
buttons for the 4÷20mA version calibration.
Available a RS485 serial port to communicate to PC or
PLC.
On request the “SoniSoft” S/W communication for PC and
the RS485/RS232 conversion module are available.
Analog output version
fig.7
fig.6
fig.5
