SGC PowerTalk Head w/ADSP & SNS 04-22, Инструкция по установке и эксплуатации

Страница: 58 / 72

PowerTalk™ Manual
54
SGC Inc. SGC Building, 13737 S.E. 26th St. P.O.Box 3526, Bellevue, WA. 98009 USA
Fax: 206-746-6384 • Tel: 206- 746-6310 • 1-800-259-7331
© 1994 SGC, Inc.
June 28, 2004; 15:46
display 6 dashes.
3) If 6 dashes are already displayed, type in the desired
banks to scan. Example: By entering "0134", the radio
will scan through banks 0, 1, 3 and 4. If an empty bank
is selected, the unit will first try to scan through that
bank, however the bank will be eliminated once it is
determined the bank is vacant.
Note: If there are no keys pressed within 4 seconds, the unit will begin
scanning automatically from the original channel on
display at the start of the function.'
4) Press the "SCAN" key again to begin scanning.
5) To change the direction of the scan , or to step through
the scan banks, rotate the Tuning Knob clockwise or
counterclockwise.
6) To allow the pause on detection, press the squelch by
pressing "3" or "SQL".
7) To stop the scan, simply press the "SCAN" key.
8.7 Changing Frequency or Channel Scan Rates
Separate scan rates are available for frequency or channel scanning. You must be
in the frequency scan mode to set frequency scan rate and in channel scan to set
channel scan rate. If the unit is not scanning, the function will change the rate of
the last scan mode performed.
Change Frequency Scan Rate (In Frequency Scan Mode)
1) Press the "SHIFT/FUNC" key.
2) Press the "Scan" key.
3) Rotate the Tuning Knob clockwise or counter-
clockwise to change the rate to the following:
a) 1 step per second |