SGC PowerTalk Head w/ADSP & SNS 04-22 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 72

background image

PowerTalk™ Manual

35

SGC Inc. SGC Building, 13737 S.E. 26th St. P.O.Box 3526, Bellevue, WA. 98009 USA

Fax: 206-746-6384 • Tel: 206- 746-6310 • 1-800-259-7331

© 1994 SGC, Inc.

June 28, 2004; 15:46

transmitted. If the Channel is currently displayed, pressing
the Frequency key will switch the display to the receive
frequency of the channel. If the frequency is being displayed,
pressing this key, then rotating the Spinner Knob clockwise
or counterclockwise will change the operating frequency of
the radio.

CHAN

If the frequency desired is currently displayed, the CHAN
button will change the display to the corresponding channel
number if the frequency has been assigned to one of the
channel memories. If the desired frequency is displayed, but
does not have a corresponding channel, the CHAN button
enables the user to input a preprogrammed channel of their
choosing .

This is slightly different from the memory architecture of
typical amateur radios which have memories numbered 1 to
99. The SG-2000 has memories numbered from 1 to 2520, 644
of which are preprogrammed and 100 of which are user
definable. Channel E0 is the international distress frequency,
2182 KHz.

The SG-2000 comes preprogrammed with all standard
marine ITU and most SITOR channels (see ITU programmed
frequency chart). The SG-2000 has the capability to hold up
to 100 operator chosen channels in permanent memory.

BANDS

The BANDS select one of 65 pre-defined frequencies located
in the ham bands. These frequencies correspond to channels
101 to 165.

Selecting BANDS displays the frequency 14150 Khz. The
Spinner Knob is then used to select the desired frequency
within the desired band.

END FUNC

The END FUNC button is used to treminate an active key
sequence.

PRGR

Pressing this key activates the programming mode which
tells the SG-2000 what to do. The best way to think of the
Program function is to remember that commands must be
"sandwiched between Program commands". For example, to
program a simplex frequency directly into use, the keyboard
sequence is PRGR, FREQ, enter the digits of the desired

«
...
37
38
39
40
41
...
»

Содержание PowerTalk Head w/ADSP & SNS 04-22









































































Отзывы:

Нет отзывов

Похожие инструкции для PowerTalk Head w/ADSP & SNS 04-22

Бренд: Yaesu Страницы: 25

Бренд: Yaesu Страницы: 3

Бренд: Yaesu Страницы: 3

Бренд: Yaesu Страницы: 20

Бренд: Yaesu Страницы: 75

Бренд: Icom Страницы: 4

CCX Lipo 2,4 GHz 3 CH

Бренд: Jamara Страницы: 12

Бренд: R&S Страницы: 93

Бренд: Lectrosonics Страницы: 24

Multimedia Master Remote

Бренд: Remotec Страницы: 19

Бренд: Sangean Страницы: 84

Бренд: Gewa Страницы: 36

Бренд: Standard Horizon Страницы: 32

Бренд: Vectronics Страницы: 26

Бренд: Kramer Страницы: 15

Бренд: B&K Страницы: 12

Бренд: T+A Elektroakustik Страницы: 60

Бренд: T+A Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды