VACUUM LEAK DETECTOR
VLXE ..
31/10/2019
- 42 -
11. Disassembly and disposal
11.1 Disassembly
Check for absence of gas and sufficient oxygen content of the air be-
fore and during the work.
Seal any openings gas-tight which could otherwise allow the spread
of an explosive atmosphere.
If possible, do not use tools capable of generating sparks (saw, angle
grinder...) for dismantling. If this remains unavoidable, comply with
EN 1127, and the area must not have a potentially explosive atmos-
phere.
Avoid any build-up of electrostatic charge (e.g. due to friction).
11.2 Disposal
Contaminated components (potential outgassing) must be disposed
of appropriately.
Dispose of electronic components appropriately.
Disassembly and disposal