SGT-3DPEG
Owner's Manual
9
９-２．
Intonation Adjustment
Use a screwdriver to turn the adjustment screws on the bridge from the tail piece side
while looking at the guitar tuner. Turing clockwise makes the tone lower and turning
counter-clockwise makes the tone higher.
Higher
Lower
９-３．
Pickup Height Adjustment
Both the front and the rear pickup can be adjusted lower or higher by turning the screws
located on the both sides of the pickup.
Lower
Higher
９-４．
Truss Rod Adjustment
If you are not familiar with the truss rod adjustment,
consult with a specialist. In case the neck is bent
forward, use the wrench (comes with the guitar)
and turn the truss rod (spoke wheel nut type)
clockwise little by little. Never turn it all at once.
In case the neck is bent backward, use the wrench
and turn the truss rod counter-clockwise little by
little. Never turn it all at once.
Forward
Backward
