Features
Strato Pi CM, all versions:
✓
9-28Vdc power supply, with surge and reverse polarity protection, and 1.1A resettable
fuse
✓
up to 1.9A max continuous current (3A peaks) to the 5V Raspberry Pi Compute Module
power supply input pins (at 24Vdc)
✓
real time clock with replaceable CR1220 Lithium / Manganese Dioxide back-up battery
✓
standard RS-485 interface to the Raspberry Pi serial line, with opto-isolator and
electrostatic discharge protection
✓
10/100 Ethernet port
✓
two USB 2.0 type-A ports, with individual power control and fault detection
✓
hardware watchdog implemented in the Strato Pi CM micro-controller, fully independent
from the Raspberry Pi Compute Module, controlled via the GPIO pins of the Raspberry
Pi board and acting on the Raspberry Pi Compute Module hardware reset line
✓
integrated boot loader for the Strato Pi micro-controller, allowing in-field firmware
upgrades directly from the Raspberry Pi
✓
embedded Microchip ATECC608 secure element chip
✓
front-panel LEDs for power supply, serial line activity, and one GPIO-controlled LED
✓
recessed push-button, hidden behind the front-panel, connected to a GPIO pin
✓
power supply and serial connections on a pluggable terminal block
✓
packaged in a compact 2 modules DIN rail case.
Strato Pi CM Solo:
✓
compatible with Raspberry Pi Compute Module 1, Raspberry Pi Compute Module 3,
Raspberry Pi Compute Module 3+ 8GB, Raspberry Pi Compute Module 3+ 16GB,
Raspberry Pi Compute Module 3+ 32GB, Raspberry Pi Compute Module 4S 8GB,
Raspberry Pi Compute Module 4S 16GB, Raspberry Pi Compute Module 4S 32GB
Strato Pi CM 3+:
✓
pre-installed and tested Raspberry Pi Compute Module 3+, 8GB, 16GB or 32GB eMMC
versions.
Strato Pi CM 4S:
✓
pre-installed and tested Raspberry Pi Compute Module 4S, 8GB, 16GB or 32GB
eMMC versions
8
Strato Pi CM User Guide
