User’s Manual
SFE
-SW5G series
5
UPLINK (P5)
PoE
Yellow
Powered from another PoE,
Powered via all 4 pairs.
Yellow
Blanking
Powered via 2 pairs, data pairs (pin 1,2,3,6)
or spare pairs (pin 4,5,7,8) are all
acceptable.
Off
No power is detected on this port.
*Power wiring
The PoE switch family includes 3 models as below:
Model number
Input Voltage
Vout/pin out/Iout
Output Wattage
Remark
E
F
S
-SW5G25A4
12-36VDC(P3)
44~57VDC(POE)
56VDC/1236/0.625A
35W/port
802.3at
E
F
S
-SW5G25B4
12-36VDC(P3)
44~57VDC(POE)
56VDC/4578/0.625A
35W/port
802.3at
E
F
S
-SW5G25D4
12-36VDC(P3)
44~57VDC(POE)
56VDC/1236+4578/0.625A
35W/port
802.3at
The PoE switch allows to be powered by another PoE source on port 5 (UPLINK) and/or on rear
terminal,
If powered on port 5 (UPLINK) as a PoE repeater, the PoE input must be 44~57VDC, the input
current is not over 2Amp.
If powered via the rear terminal, please make sure the input current is not over 10A.
