SEWOO LK-P12W, Руководство пользователя

Страница: 7 / 13

10
11
Badness Paper
While Peeler mode is “On”, perhaps engraved lines of the
label paper are cut too deep, peeling error might occur.
Laper Paper
Laper Paper
Engraved Line
Normal paper
3-7. Diagnostic Test
1 2
3
NOTE
Turn off the printer.
The information label prints.
Press and hold the feed
button and power button.
1. For Hex Dump mode, do steps 1-2 then
press the feed button.
2. After printing ASCII pattern,
the diagnostic test is complete.
3. If the feed button is not pressed to go to
Hex Dump mode, the printer exits
diagnostics after three seconds.