13
12
1 2
3 4
OPEN THE HEAD ASS’Y
BY PUSHING THE LEVER.
1. PLACE RIBBON CORE ON THE HOLDER(1)
2. PLACE THE RIBBON ON THE RIBBON SUPPLY
SPINDLE(2)
Ribbon
Guide Shaft
7. Load Ribbon
1 2
3
OPEN THE HEAD ASS’Y BY PUSHING THE
BUTTON.
The printhead may be hot
REMOVE HEAD SET SCREW(1) WITH (-) SCREW
DRIVER (YOU MAY USE A COIN).
8. Replace HEAD
PULL THE DETACHED HEAD ASS’Y(1) TO
THE HEAD ASS’Y.
DETACH HEAD ASS’Y TO THE DOWNWARD.
4
1
2
PRESS THE FEED BUTTON TO REMOVE RIBBON
WRINKLE
CHECK
1
2
1. SLIDE THE RIBBON UNDER THE RIBBON
GUIDE SHAFT.
2. PULL THE RIBBON TO THE FRONT OF THE
HEAD ASS’Y.
PRESS THE PUSH BUTTON ON TOP OF THE HEAD
ASS’Y AND LOWER THE HEAD ASS’Y UNTIL IT
LOCKS. MAKE SURE TO CHECK THE CLOSING
SOUND.
PLACE THE RIBBON AS SHOWN IN THE PICTURE
AND FIX ON THE RIBBON CORE BY TAPING.
