background image

32

4  Power supply

Power supply

This device can be operated using:

 

● Disposable (non-rechargeable) alkaline batteries

 

Rechargeable NiMH batteries

The device comes with nickel metal hydride rechargeable batter-

ies. The corresponding settings are stored.

A

 

CAUTION!

The device must not be used with leaking batteries.

 

Replace leaking batteries.

 

Clean the battery compartment (and, if necessary, the 

device) before inserting the new disposable/recharge

-

able batteries.

4.1 

Suitable disposable/rechargeable battery types

A

 

WARNING!

To ensure that the device remains explosion-proof as per 

/5/, only the following disposable/rechargeable batteries 

may be used:

 

Batteries supplied by SEWERIN

 

Batteries other than those supplied by SEWERIN, pro-

vided compliance with /2/ is guaranteed.

The batteries used in a battery compartment must always 

be identical in terms of type (disposable/rechargeable), 

capacity and manufacturer.

Disposable battery requirements

 

Alkaline disposable batteries

 

Battery size: AA, Type: LR6 as per /3/

 

The creepage distance and air gap between the poles must 

not be less than 0.5 mm in accordance with /2/.

Содержание VARIOTEC 460 Tracergas









































































Отзывы: