sewerin EX-TEC PM 4 Скачать руководство пользователя страница 10

Страница: 10 / 98

1 General

General

1.1

Warranty

The following instructions must be complied with in order for any

warranty to be applicable regarding functionality and safe opera-

tion of this equipment.
Hermann Sewerin GmbH cannot be held responsible for any dam-

ages resulting from non-compliance with these instructions. The

warranty and liability provisions of the terms of sale and delivery

of Hermann Sewerin GmbH are not affected by the information

given below.

This product must only be operated after the relevant operating

instructions have been read and understood.

This product may only be operated by qualified profession

als who are familiar with the legal requirements (Germany:

DVGW).

This product must only be used for its intended purpose.

This product is only suitable for use in industrial and commer

cial applications.

Repairs must only be carried out by a specialist technician or

by other suitably trained personnel.

Changes or modifications to this product must not be carried

out without approval from Hermann Sewerin GmbH. The manu

facturer cannot be held responsible for damages if unapproved

modifications have been made.

Only accessories supplied by Hermann Sewerin GmbH may

be used with this product.

All repairs must be carried out using replacement parts that

have been approved by Hermann Sewerin GmbH.

Only approved battery types may be used, otherwise the device

will not be explosion-proof.

The manufacturer reserves the right to make technical modifi

cations in the course of further development.

Generally applicable safety and accident-prevention regulations

must be complied with, in addition to the information provided in

this manual.

Содержание EX-TEC PM 4



































































































Результаты поиска

Содержание EX-TEC PM 4

Отзывы:

Похожие инструкции для EX-TEC PM 4

Бренды по названию

Популярные бренды

sewerin EX-TEC PM 4, Руководство по эксплуатации

Результаты поиска

Содержание EX-TEC PM 4

Отзывы:

Похожие инструкции для EX-TEC PM 4

Бренды по названию

Популярные бренды