SEW-Eurodrive USM21A, Руководство пользователя

Страница: 11 / 24

5
Startup
Requirements
Manual – Interface Adapter USM21A
11
5 Startup
5.1 Requirements
The following engineering software versions can be used for operating the interface
adapter USM21A:
Engineering software Version
MOVISUITE
®
Version V1.2.1253.0 or later
MOVITOOLS
®
MotionStudio RS485: Version V6.3.0.0 or later
CAN: in preparation
INFORMATION
When starting up and operating the interface adapter, make sure that only the engi-
neering software is open that is used for engineering the respectively connected unit
(for more details, see section "Connecting the interface adapter"). Any other engi-
neering software must be closed.
5.2 Configuring the interface adapter in MOVITOOLS
®
MotionStudio
Configuring the interface adapter in MOVITOOL S® MotionS tudio
The interface adapter is connected either to the RS485 interface or the CAN bus inter-
face (in preparation), depending on the device type. It is necessary to configure the
corresponding communication connection.
• "Setting up RS485 communication" (→
2
12)
28516273/EN – 11/2018