5
Startup
Configuring the interface adapter in MOVITOOLS® MotionStudio
Manual – Interface Adapter USM21A
12
5.2.1
Setting up RS485 communication
Proceed as follows:
ü
You have installed the MOVITOOLS
®
MotionStudio engineering software, version
6.3.0.0 or higher, on the engineering PC.
ü
The MOVISUITE
®
engineering software is closed.
1. Start MOVITOOLS
®
MotionStudio.
2. To configure the communication connections, click in the toolbar on the [Configure
communication connections] symbol.
23215358219
3. Select the "Serial" communication connection and edit the communication parame-
ters of the serial RS485 interface.
17865929867
4. Select the COM port that is assigned to the interface adapter.
17865934603
5. Apply the settings and perform the network scan in MOVITOOLS
®
MotionStudio.
28516273/EN – 11/2018
