Operating Instructions - Low Backlash Planetary Gear Units
5
2
2
Safety Notes
Preliminary
remarks
The following safety notes are principally concerned with the use of gear units.
If using geared motors, please also refer to the safety notes for motors in the
corresponding operating instructions.
General
information
During and after operation, geared motors and gear units have live and moving parts
and their surfaces may be hot.
All work related to transport, putting into storage, setting up/mounting,
connection, startup, maintenance and repair only by trained personnel observing
•
the corresponding detailed operating instructions booklet(s) and wiring
diagrams,
•
the warning and safety signs on the gear unit/geared motor,
•
the specific regulations and requirements for the system and
•
national/regional regulations governing safety and the prevention of
accidents.
Severe injuries and damage to property may result from
•
incorrect use,
•
incorrect installation or operation,
•
removal of required protective covers or the housing when this is not permitted.
Designated use
These geared motors/gear units are intended for industrial systems. They correspond
to the applicable standards and regulations. The technical data and the information
about permitted conditions are to be found on the nameplate and in the documentation.
It is essential for all specified information to be observed!
Transport / putting
into storage
Inspect the delivery for any damage in transit as soon as you receive the delivery. Inform
the transport company immediately. It may be necessary to preclude startup.
Use suitable, sufficiently rated handling equipment if necessary. Remove any transport
fixtures prior to startup.
Store the gear unit in a dry, dust-free room if it is not going to be installed straight
away.