2
Safety notes
Installation/assembly
Compact Operating Instructions – MOVITRAC
®
LTP-B
10
2.8
Installation/assembly
Ensure that the product is installed and cooled according to the regulations in this doc-
umentation.
Protect the product from strong mechanical strain. Ensure that components are not
deformed and insulation spaces are not changed, particularly during transportation
and handling. Electrical components must not be mechanically damaged or destroyed.
Observe the notes in the chapter "Mechanical installation".
2.8.1
Restrictions of use
The following applications are prohibited unless the device is explicitly designed for
such use:
•
Use in potentially explosive atmospheres
•
Use in areas exposed to harmful oils, acids, gases, vapors, dust, and radiation
•
Operation in applications with impermissibly high mechanical vibration and shock
loads in excess of the regulations stipulated in EN 61800-5-1
•
Use at an elevation of more than 3800 m above sea level
The product can be used at altitudes above 1000 m above sea level up to 3800 m
above sea level under the following conditions:
•
Taking the reduced continuous rated current into consideration, see the chapter
"Technical data" of the documentation.
•
Above 2000 m above sea level, the air and creeping distances are only sufficient
for overvoltage class II according to EN 60664. If the installation requires over-
voltage category III according to EN 60664 you have to reduce the overvoltages
on the system side from category III to II using additional external overvoltage pro-
tection.
•
If a protective electrical separation is required, then implement this outside the
product at altitudes of more than 2000 m above sea level (protective separation in
accordance with EN 61800‑5‑1 and EN 60204‑1).
26879778/EN – 03/2021
Содержание MOVITRAC LTP-B
Страница 2: ...SEW EURODRIVE Driving the world...
Страница 47: ......