Addendum to the Operating Instructions – MOVIMOT® MM..D Retrofit Set AC Motors DRS/DRE/DRP
5
2
Scope of delivery of the retrofit set
Mechanical Installation
2
Mechanical Installation
2.1
Scope of delivery of the retrofit set
Check the scope of delivery of the MOVIMOT
®
MM03D – MM40D retrofit set for
completeness using the following figure.
2.2
Assembly
1. Unscrew the terminal box cover and
remove the power supply cable.
Result as shown in the figure to the
right:
* Brake control, optional
(only with brakemotors)
783979147
[A]
Terminal box gasket
[E]
PE screw
[I]
Drive-ID module
[B]
Connection box
[F]
Connection cable
[J]
2 screws
[C]
4 screws
[G]
Cover with inverter
[D]
Connection pcb
[H]
4 screws
Parts [B] and [D] through [J] are already installed when the retrofit set is delivered.
[A]
[B]
[D]
[E]
[F]
[G]
[I]
[H]
[C]
[J]
DANGER
Disconnect the drive from the power supply before removing the terminal box cover.
Severe or fatal injuries from electric shock.
• Disconnect the drive drive from the supply system and secure it against
unintentional reconnection to the voltage supply.
• Then wait at least for 1 minute.
*
9007200042328587
