manualshive.com logo in svg

SEW-Eurodrive DHE21B, Руководство пользователя, Страница: 62 / 80

Поделиться
Скачать
SEW-Eurodrive DHE21B Скачать руководство пользователя страница 62

62

Manual – Controllers DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)

5

Communication via Ethernet

Project Planning and Startup with MOVITOOLS

®

 MotionStudio

8. For the engineering PC, enter an IP address that meets the following conditions:

•

In the blocks that define the 

network

, the address segment for the engineering

PC must correspond to the other Ethernet stations.

•

In the blocks that define the 

station

, the address segment for the engineering PC

must differ from the other stations.

•

The last block must not contain the values "0", "4", "127" or "255".

NOTE:

 In the IP address of the subnet mask (such as 255.255.255.0), the values

in the blocks have the following meaning:

– "255", defines the address of the network where the stations are located.

– "0", defines the address of the actual station to distinguish it from other

stations.

5.5.3

Configuring the communication channel via Ethernet

Do the following to configure a communication channel for Ethernet:

1. Click on "Configure communication connections" [1] in the toolbar. 

This opens the "Configure communication connections" window.

2. From the list [1], select "Ethernet" as the communication type.

In the example, "ETHERNET" is activated as the communication type for the first
communication channel [2].

9007200388082827

[1] "Configure communication connections" icon

9007200399122315

[1] "Type of communication" dropdown menu
[2] "Activate" checkbox
[3] [Edit...] button

[1]

[1]

[2]

[3]

0

0

I

 

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Содержание DHE21B

















































































Отзывы:

Нет отзывов