SEW-Eurodrive CM3C Series, Дополнение к руководству по эксплуатации

Страница: 9 / 32

6
Electrical installation
Information on connector connection
Addendum to the Operating Instructions – AH0E and AK0J Encoders
9
6 Electrical installation
6.1 Information on connector connection
The cable is entered via an adjustable right-angle connector. SEW‑EURODRIVE re-
commends to adjust the adjustable right-angle connector while the mating connector
is plugged in.
NOTICE
Damage to the right-angle connector in case of rotation without mating connector.
Damage to the plug connector and the sealing surface.
• Adjust the right-angle connector only while the mating connector of the motor
cable is plugged in.
• If you do not have a mating connector at hand, do NOT use pliers to adjust the
right-angle connector.
INFORMATION
The connector should only be rotated to install and connect the motor. Do not turn
the plug connector regularly once it has been installed.
Comply with the permitted bending radii of the cable.
6.1.1 Connector positions SE1, SJ1, and SJB
Right-angle plug connectors SE1, SJ1, and SJB can be aligned horizontally in any de-
sired position. The following figure illustrates an example of various plug connector
alignments:
9007231550278027
6.1.2 Connector positions SE2 and SE3
Right-angle plug connectors SE2 and SE3 can be aligned horizontally in any desired
position. The following figure illustrates an example of various plug connector align-
ments:
32308961803
29149851/EN – 04/2020