Seville Classics UltraHD 20283, Руководство по сборке

Страница: 4 / 7

Step 1: Install "L" Bracket (#47)
NOTE:
Screw holes face inward
Step 2: Install Leg Piece (#5-B)
NOTE:
Step 3: Install the Bottom Shelf (#3)
NOTE:
The bottom shelf can be reversed as an optional
bottom tray.
Make sure the top of the legs are attached to the
wood top. The screw hole side of the legs are
facing inward.
Do not fully tighten the screws. This will help
you make any adjustments for alignment.
Attach the "L" Bracket (#47) to the Leg piece (#5-
B) as the picture shows, use 8 pcs of Screw (#50),
Lock Washer (#59) and Screwdriver (#21) to
tighten. Repeat this step to install "L" Bracket
(#47) to another Leg piece (#5-B).
Do not fully tighten the screws. This will help
you make any adjustments for alignment.
ASSEMBLY INSTRUCTIONS (pg 3 of 5)
Mobile Work Table (Model No. 20283)
Make sure the top of the bottom shelf is aligned
with the leg's crossbar before tightening the
screws.
Attach the Leg pieces (#5-B) to the back of the
Solid Hardwood Board (#1). Line up the screw
holes, use 16 pcs of Screw (#50), Lock Washer
(#59) and Screwdriver (#21) to tighten.
Install the Bottom Shelf (#3) with 8 pcs of Screw
(#14) and M4 Washer (#27) as the picture shows.
#5-B
#59
#50
#59
#14
#27
#3