background image

We’re con

dent you’ll love your gorgeous new Next 

 furniture. However, it’s worth making absolutely certain 

before you put it all together.  

So, let’s quickly run through these three steps:

TIPS FOR RETURNS

Not completely happy with the product? No problem.

We just need everything back in the original packaging, so follow the steps below

 and this will ensure a super-smooth returns process and no delay to your refund.

1. COLOUR  

Make sure you’re happy with the colour 

No need to unpack everything, just check the first component.

2. PROTECTIVE PACKAGING 

If you’re happy, then it’s time to get opening! 

Start by laying everything out

on the protective packaging – this will prevent anything getting scratched.

3. PARTS PAGE  

Finally, double check you have all the pieces by referencing 

the parts page of the instructions.

•   Check everything is there (the ‘parts page’ 

is a handy checklist).

•   Pop all the loose fittings and fixtures into 

the packaging provided or tie them up in a 
plastic bag.

•   Wrap all the big components back  

up in the original protective packaging.

•   Close up the box and seal it securely  

(don’t be afraid to use plenty of tape).

DO

DON’T

•   Leave anything assembled -  

all components should be dismantled  
and separately packed.

•   Put loose fixtures and fittings straight 

into the box.

•   Throw it back in the box carelessly –  

as it may get damaged.

Then just give us a call on 0333 777 8999 and we’ll sort out a pick up time for you.

BEFORE YOU GET 

STARTED...

Summary of Contents for SLOANE 408097









Reviews: