Step 7:
Step 8:
Note:
ASSEMBLY INSTRUCTIONS
(pg 4 of 7)
Each Drawer's maximum loading capacity is 40
lbs.
UltraHD Stainless Steel Pegboard Workcenter (Model No. 20267)
Attach the Drawer Base Panel (#19-2) between
the Drawer Left and Right Side Panels (#20-3 and
#20-4) and into the back of the Drawer Front
Panel (#20-1). Line up screw holes and use Screws
B (#15) to tighten.
Note: Do not fully tighten the screws. Once you
adjust all the parts in position, tighten all screws.
Attach the Drawer Back Panel (#20-5) to the rest
of the assembled drawer. Line up screw holes and
use Screws B (#15) to tighten.
Repeat Steps 6-8 to assemble the second drawer.
Install Drawer Base Panel (#19-2).
Install Drawer Back Panel (#20-5).
#15
#19-2
#20-5
#15
#20-3
#20-5
#20-4
#20-1
#19-2
