Seville Classics UltraHD 20164, Руководство по сборке

Страница: 9 / 15

TIP:
WARNING:
Step 1: Install Left Side Panel (#1-A)
Step 2: Install Right Side Panel (#2-A)
Step 3: Install Door Panel (#6-A)
Note:
Make sure all the panels assembled up to this point are
flush.
ASSEMBLY INSTRUCTIONS
(pg 8 of 13)
UltraHD Storage Cabinet (Model No. 20
164
)
Some parts may have sharp edges. To avoid injury,
wearing gloves is recommended during assembly.
A magnetic screwdriver is included for your
convenience. If a power screwdriver is used, keep
on a low torque setting.
Place the Left Side - Upper Panel (#1-A1) and Left Side
- Bottom Panel (#1-A2) together, line up screw holes,
use 3pcs of Screw G (#42) to tighten from the side
Repeat Step 1, place Right Side Upper Panel (#2-A1),
Right Side Bottom Panel (#2-A2) together, line up
screw holes, use 3pcs of Screw G (#42) to tighten from
the side
1). Place Door - Upper Panel (#6-A1) and Door -
Bottom Panel (#6-A2) together, line up screw holes,
use 2 pcs Screw F (#41) to tighten from the side.
2). Place the Door Panel Connection Part (#6-A3) over
the touching sides, line up the screw holes, use 4pcs
Screw F (#41) to tighten from the top, and use 4pcs
Screw K (#52) to tighten from outside edge.