Seville Classics UltraHD 20164, Руководство по сборке

Страница: 13 / 15

Step 14 :
Stainless Steel Maintenance:
These parts have an UltraGuard® fingerprint resistant finish. Do not use
traditional stainless steel cleaners on this unit. Lightly wipe off once a month
with clean warm water and a soft cloth (preferably a microfiber cloth). This is
the safest formula to prevent new stains from appearing over time and
manage unwanted fingerprints or grease marks. Remember to always wipe
in the direction of the surface grain (NEVER ACROSS) and always use a lint-
free cloth. Once the surface is clean,thoroughly wipe dry with a soft
absorbent cloth.
ASSEMBLY INSTRUCTIONS
(pg 12 of 13)
UltraHD Storage Cabinet (Model No.
20164
)
A. Remove 1 pc Screw F (#41) from the back corner
protection.
Install Mounting Strap (#60)
B. Attach the Mounting Strap (#60) to the back
Corner Protection brackets as the left photo shows
using Screw O (#61) and Washer (#27).
C. Drill a hole in the wall with a 5/16" drill bit, insert
the Wall Anchor (#55-A) into the hole.
D. Attach the other end of the Mounting Strap (#60)
to the wall using Screw M (#55) and Washer (#27-B).
Repeat steps A through D to install the other
mounting strap.
Warning: To prevent possible tipping, it is suggested that the
Mounting Straps be installed. For safety, secure the mounting
straps to wood studs whenever possible.