TIP:
WARNING:
Step 1: Install (#1-A) Left Side Panel.
Note:
Step 2: Install (#2-A) Right Side Panel.
Step 3: Install (#6-A) Left Door.
Note:
1).
Place (#6-A1) Left Door - Upper Panel and (#6-A2)
Left Door - Bottom Panel together, line up screw holes,
use 1pc (#41) Screw F to tighten from the side.
2).
Place the (#6-A3) Door Panel Connection Part over
the touching sides, line up the screw holes, use 4pcs
(#41) Screw F to tighten from the top, and use 4pcs
(#52) Screw K to tighten from outside edge.
Make sure the (#6-A1) Left Door - Upper Panel is
flushed with (#6-A2) Left Door - Bottom Panel.
Repeat
Step 1
, use (#2-A1) Right Side Upper Panel,
(#2-A2) Right Side Bottom Panel, (#1-A3) Side Panel
Reinforcement Connection Part 3pcs (#42) Screw G to
tighten from the side, then use 4pcs (#41) Screw F to
tighten from the top side.
ASSEMBLY INSTRUCTIONS
(pg 8 of 13)
Storage Cabinet (Model No. 20143)
Some parts may have sharp edges. To avoid injury,
wearing gloves is recommended during assembly.
This package contains an updated product
construction designed for easier transportation
while maintaining a rigid structure.
Maximum loading capacity is 600LBS.
A magnetic screwdriver is included for your
convenience. If a power screwdriver is used, keep
on a low torque setting.
Make sure the (#1-A1) Left Side Upper Panel is flushed
with (#1-A2) Left Side Bottom Panel.
Place the (#1-A1) Left Side - Upper Panel and (#1-A2)
Left Side - Bottom Panel together, place the (#1-A3)
Side Panel Reinforcement Connection Part over the
touching edges, line up screw holes, use 3pcs of (#42)
Screw G to tighten from the side, then use 4pcs of
(#41) Screw F to tighten from the top side.
