DO NOT SKIP THIS STEP (!)
Step 14: Install Mounting Strap (#60)
Stainless Steel Maintenance:
These parts have an UltraGuard® fingerprint resistant finish. Do not use
traditional stainless steel cleaners on this unit. Lightly wipe off once a
month with clean warm water and a soft cloth (preferably a microfiber
cloth). This is the safest formula to prevent new stains from appearing
over time and manage unwanted fingerprints or grease marks.
Remember to always wipe in the direction of the surface grain (NEVER
ACROSS) and always use a lint-free cloth. Once the surface is
clean,thoroughly wipe dry with a soft absorbent cloth.
ASSEMBLY INSTRUCTIONS
(pg 12 of 13)
Storage Cabinet (Model No. 20143)
A. Remove 1 pc Screw F (#41) from the back corner
protection.
B. Attach the Mounting Strap (#60) to the back
Corner Protection brackets as the left photo shows
using Screw O (#61) and Washer (#27).
C. Drill a hole in the wall with a 5/16" drill bit, insert
the Wall Anchor (#55-A) into the hole.
D. Attach the other end of the Mounting Strap (#60)
to the wall using Screw M (#55) and Washer (#27-B).
Repeat steps A through D to install the other
mounting strap.
