Step 14: Install Mounting Strap (#60)
UltraHD® Stainless Steel Care Instructions
• Lightly wipe with warm water and clean microfiber cloth
• Always wipe in the direction of the surface grain (NEVER ACROSS)
• Wipe away excess water with dry clean cloth
The stainless steel is protected with UltraGuard® fingerprint resistant finish.
DO NOT
use traditional stainless-steel cleaners. To safely manage unwanted fingerprints
and prevent new stains, perform the following steps once monthly:
UltraHD® Mega Storage Cabinet (Model No. 16238, 20148, 20158)
*NOTE: We recommend using TWO people to assemble the cabinet.
A. Remove 1 pc Screw F (#41) from the back corner
protection.
B. Attach the Mounting Strap (#60) to the back
Corner Protection brackets as the left photo shows
using Screw O (#61) and Washer (#27).
C. Drill a hole in the wall with a 5/16" drill bit, insert
the Wall Anchor (#55-A) into the hole.
D. Attach the other end of the Mounting Strap (#60)
to the wall using Screw M (#55) and Washer (#27-B).
Repeat steps A through D to install the other
mounting strap.
12