E - 2
1
17. TROUBLE SHOOTING
Before going through the check list, check wiring connection. If any of the problems
persist after check list has been made, consult your nearest service dealer.
Symptom
Cause
Solution
The car ignition is not
on.
If the power supply is properly
connected to the car accessory
terminal, switch the ignition key to
“ACC”
No power
The fuse is blown.
Replace the fuse.
Presence of CD disc
inside the player.
Remove the disc in the player and
put a new one.
Inserting the disc in
reverse direction.
Insert the compact disc with the
label facing upward.
Compact disc is
extremely dirty or
defective.
Clean the disc or try to play a new
one.
Temperature inside the
car is too high.
Cool off or wait until the ambient
temperature returns to normal.
Disc cannot be
loaded or
ejected
Condensation.
Leave the player off for an hour and
then try again.
Volume is in minimum.
Adjust volume to a desired level.
No sound
Wiring is not properly
connected.
Check wiring connection.
The operation
keys do not
work
The built-in
microcomputer is not
operating properly due
to noise.
Press the RESET button.
Front panel is not properly fixed
into its place
The installation angle is
more than 30 degrees.
Adjust the installation angle to less
than 30 degrees.
Sound skips.
The disc is extremely
dirty or defective
Clean the compact disc. Then try
to play a new one.
The antenna cable is
not connected.
Insert the antenna cable firmly.
The radio does
not work.
The radio station
automatic
selection does
not work.
The signals are too
weak.
Select a station manually.
ERROR 1
Mechanism Error
Press the reset button if the error
code
does not disappear, consult your
nearest
service dealer.
ERROR 2
Servo Error
Press the reset button if the error
code does not disappear, consult
your nearest service dealer.