SEVERIN KM-3907, Инструкция по эксплуатации

Страница: 14 / 82

operation, the pestle should remain
inserted.
– While the appliance is running , feed the
prepared pieces of fruit into the chute,
using the pestle to push it lightly down.
– Caution: Too much pressure may result
in damage to the motor or the insert.
– When processing larger quantities of
fruit or vegetables, the fi lter basket and
the juice container must be emptied from
time to time.
Operation setting
– Set the speed control to Max .
G. Blender
– Th e blender cannot be used unless the
bowl has been properly fi tted; otherwise
the safety switch is not activated:
– Fit the bowl.
– Place the lid on the bowl and turn it anti-
clockwise to lock.
– Remove the safety lid from the blender
mounting by turning it clockwise to
unlock.
– Place the blender jug on its mounting and
turn it anti-clockwise to lock.
– Put in the ingredients, then fi t the blender
lid and lock it by turning anti-clockwise.
– To add ingredients during operation,
remove the small stopper in the centre of
the blender lid; turn clockwise to unlock it.
– Aft er processing, switch off the appliance
and remove the blender jar by turning it
clockwise and lift ing it off .
– Caution: Do not let the blender unit run
dry (i.e. without any contents).
– Maximum fi ll amount:
1 litre of liquid, or
300g of fruit, or
250 ml ice cubes
Operation settings
– For soft er types of fruit and vegetables, a
suitable speed setting between 2 and Max
should be selected.
– Select Max speed for harder fruits and
vegetables.
– Always use the Pulse switch for crushing
ice.
– Short-term operation:
When using the blender, please note that
the appliance is designed for short-term
operation only - it must not be operated
for more than 20 seconds at a time. Switch
off the appliance aft erwards and allow
suffi
cient time for it to cool down before
resuming operation.
General care and cleaning

Turn off the appliance aft er use, remove
the plug from the wall socket and wait
until the motor has come to a complete
standstill.

To avoid the risk of electric shock, do not
clean the appliance with water and do not
immerse it in water.
– Th e housing may be wiped with a slightly
damp, lint-free cloth.
– Attachment parts should be thoroughly
cleaned immediately aft er use, using hot
water and a mild detergent.

Do not put the attachments in a dish
washer except for the slicing and
shredding inserts.

Do not use abrasives or harsh cleaning
solutions.

Caution: When cleaning the chopping
blade and slicing or shredding inserts,
beware of sharp edges and blades - these
can be extremely dangerous.
– Always store the chopping/mincing blade
in its protective plastic cover.
– Use only the spatula to remove food
residue from the bowl.
– Hint: Th e blender unit should be cleaned
immediately aft er use; put l litre warm
water with a little detergent into the
jug and let the blender run for about
20 seconds as described in the section
Operation . Rinse the blender jug, lid
and stopper thoroughly with clean water
aft erwards and wipe dry, repeating the
process if necessary.
14