14
Optional Upgrade: Digital Clock
Stay on time with an elegant, in-mirror digital clock. Conveniently set and adjust the time with an easy-to-use IR remote.
After mounting the lighted mirror housing and making field wiring connections to the fixture, then it’s time to hard wire the digital
clock. There are two wires on the back of the mirror that are on the clock. One wire is positive and one is negative. Insert the two
wires into the wire nuts that are connected to the power supply on the mirror housing. The wires are color coordinated – the red
wire goes into the red lead and the black wire goes into the black lead.
After installation, program the clock using the Séura remote control.
Clock setting instructions:
1. Press the square until minutes flash
2. Move up/down arrows to select minutes
3. Press the square and hours digits will flash
4. Move up/down arrows to select hours
5. Press the square again to exit clock setting mode
