34
35
Display Features
10"
19"
Display technology LED-LCD
TFT-LCD
Screen Size
10"
19"
Format
16:9
16:9
Brightness
450 cd/m2
450 cd/m2
Viewing angle
170°
170°
Contrast
1000:1
1000:1
Response Time
8ms or faster
8ms or faster
native Resolution
1024 x 600
1440 x 900
Menu Languages
English, French, Spanish English, French, Spanish
Tuner
aTV
nTSC
Digital
aTSC/QaM
amplified audio
Output amplifier Power
5W x 2 Speaker Output
Internal Speakers
5W x 5W Speakers
Connections and Terminals
Listed from left to right as viewed from the back of the product.
Power adapter Input
Input: 100-240 V aC, 50/60Hz 1.5a, Type a plug
Output: 19V, 3.42a Right angle Plug, 18” Cord
RS232
9-pin DB9 female
amplified Speaker Output
5w x 2 Degson Terminal Block (green)
HDMI
480i, 480p, 576i, 576p, 720p and 1080i, and 1080p
Vga
15-pin D-sub female
Component Video
Y (green), Pb (blue), and Pr (red)
aV (Composite)
Composite Video (yellow)
audio Left/Mono (white), audio Right (red)
PC audio In
3.5mm audio Input (blue)
Stereo audio Out
3.5mm audio Output (green)
RF
75ohms Coaxial antenna
USB
Universal Serial Bus Connector Port
IR Output
4 – 3.5mm Output (blue)
IR Input
3.5mm Input (pink)
Headphone Output
3.5mm Output (grey)
Optimal Temperature & Humidity
Operating Temperature
-20 - 60˚C
Storage Temperature
-10 - 50˚C
Operating Humidity
10 - 80% RH
Storage Humidity
10 - 90% RH
5-1
Specifications
5
Specifications
6-1
Mirror Care
6-2
Troubleshooting
6
Maintenance
6-1
Mirror Care
Our patented mirror technology has been developed to completely protect the mirror surface and allow ease of maintenance for the consumer. Please
follow the guidelines listed for proper mirror care and cleaning:
• The glass surface can be cleaned with any conventional non-ammoniated glass cleaner. Care should be taken to use only a soft lint-free cloth. Apply
all cleaners directly to the cloth and not the mirror surface. never saturate the mirror surface as residual cleaner may seep behind the mirror.
• Stubborn spots can be removed with solvents such as mineral spirits, de-natured alcohol, and acetone, Immediately remove solvent and dirt residues
per the prescribed methods above with a compatible glass cleaner or water.
6-2
Troubleshooting
Before contacting service personnel, please read the following information. If you still experience problems, contact your local dealer or qualified
service personnel.
Unclear display or noisy sound
Check whether TV antenna is correctly connected.
Broadcasting may not be good in an area with bad
reception or far away from a station/network.
no image
Check whether the power cord is properly connected. and
press the power button.
Black background only
Check whether the mode is set as PC monitor input, not
TV mode.
strips and shaking display
It may be interrupted by neighboring radio waves (please
check any wireless phone, hair drier, electric drilling
machine and etc).
Execute fine tuning for manual adjustment.
Can’t receive a specific channel
Check whether channel setting is normally set.
Try to rotate an antenna’s direction.
Picture plays without sound
Press the MUTE button.
Volume up by using volume control buttons.
TV-related Problems
no image on the monitor
Check whether the D-Sub cable is firmly connected to the TV and a PC.
Check whether a graphic card is correctly inserted into the slot.
Check whether the power of a PC and the TV is on.
Check whether a graphic card or mode is set appropriately on a PC.
Referring to the Standard Signal Mode for PC monitor in the previous chapter,
change graphic mode.
Check whether the D-Sub cable pins are not inserted or bent.
no power
Check whether the power cord is normally inserted and reconnect it.
Pull out the power cord from wall outlet and reconnect it in 10~20 minutes.
LED lamp turns off in red and it shows no image
Check whether the graphic cable is connected to theTV and a PC.
Check whether a computer is in power-saving mode and attempt to operate
keyboard and mouse.
Unstable or unfocused image or trembling
Check whether the D-Sub cable is connected to the TV and a PC.
If a PC display mode is changed, the screen needs readjusting, so you need to use
auto adjustment.
Check whether the TV and your graphic card are compatible with each other and
whether it is set at an appropriate refresh rate. If letters look distorted, change the
refresh rate to 60Hz.
abnormal image scale
By using vertical/horizontal position in Picture adjustment Menus, adjust the position.
Try to execute auto adjustment function.
Work with your local Séura reseller for additional support and/or product questions.
For support directly from Séura’s customer service or technical support teams,
call
toll-free 800-957-3872
. Support teams are available weekdays 8:00am - 4:30 CST.
PC Monitor-related problems
additional Support
