12
2-2
Basic Installation Instructions
nOTE: all SÉURa drawing packages indicate generalized nominal residential wood framing construction, and are not indicative of any particular
building code. It is the installers responsibility that all electrical, audio/visual, and framing construction are code compliant to the municipality
in which the product is being installed. Modifications made to SÉURa’s recommendations are at the sole discretion of the installer and release
SÉURa of all liability.
1. Reference installation specifications included with your product for specific mounting
instructions designed for your exact mirror size and configuration.
2. Verify that the wall is built to the provided specifications.
3. Install mounting brackets.
• Refer to Fastener Packet for detailed mounting instructions.
• Ensure mounting brackets are securely fastened using wood
framing members where possible.
4. Transport product in a vertical position to desired location to avoid product flex or damage.
5. Connect power supplies and audio/video components.
• It is strongly recommended to test all electrical and electronic devices to verify proper integration and functionality before securely
mounting it to the wall.
6. Position television mirror close to wall surface and securely engage mounting brackets.
• Allow for a 1/4” ventilation gap for proper air flow and heat transfer.
7. Check to ensure the television mirror is fully engaged and secure to the mounting brackets.
8. Reference the appropriate electronics manual for television mirror operating instructions.
2-1
Recommended Installation Location
The environment in which the television mirror
product is installed will affect the product’s
performance. The key factor to consider for proper
installation is surrounding and ambient light. Use the
following guidelines to maximize the performance of
the SÉURa product:
Type of Lighting:
avoid direct natural sunlight and
excessive fluorescent lighting on the television
display. These conditions will diminish the television
brightness, and hinder its performance.
Light Direction:
avoid directing lights toward the
mirror. Position lights such that they provide light on
the person or object to be reflected, not the mirror
itself. For example, lights on the wall next to the
mirror are preferred over lights located on the ceiling
in the center of the room.
Background Colors:
Sidewalls and furnishings that
are dark, uniform, and non-reflective will provide
for better performance of the television quality.
Bright colors, patterns, and contrasting colors will
minimize the quality of the display.
N
N
LCD
1/4" VENT
GAP
RETAINING
CLIP
MIRROR
SURFACE
INTERLOCKING
Z-BRACKETS
WALL
SURFACE
INTERFACE
PLATE
TYPICAL WALL SURFACE
SHOWING THE NEEDED
ROUGH OPENING
INTERLOCKING
BRACKETS
TYPICAL A/V AND
POWER LOCATION
SHEET
2
Screen Size Class: 32”, 40”, 46", & 52”
Panel Type X-Gen LCD Panel
10-bit LCD Panel Yes
Pixel Resolution Full 1920 x 1080 HD Resolution
Backlight System Full Array LED
Viewing Angles 176º H / 176º V
LED Life (hours)1 100,000
Audio System 10W + 10W
120HzFrameRate Yes
Tuning System ATSC / QAM / NTSC
Spectral Contrast Engine Level MC (over 2,000,000:1)
Aspect Ratio 16:9
Response Time 4ms
Features:
AQUOS® Series Yes
AQUOS Net Yes (N/A on 32” LCD)
AQUOS Advantage SM Support Yes (N/A on 32” LCD)
Digital Still Picture Display Yes
Game-Optimized Yes
Terminals Inputs:
HDMI™ 4 (v1.3 with deep color)
HD Component 2 (1080p compatible)
Composite Video RCA x 2
S-Video 4-pin DIN x 1
Audio Inputs (L/R) 4 RCA
RS-232C 1
PC 1 (15-pin D-sub)
Ethernet Input 1 (N/A on 32” LCD)
Power:
Power Consumption AC (watts) 32” = 130W
40” = 160W
46” = 200W
52” = 250W
32",40",46", 52", 65" PREMIER:
BACK LIGHT: 16
BRIGHTNESS: 0
CONTRAST: 33
COLOR: -9
TINT: 5
SHARPNESS: -4
TOLERANCES
DIMENSIONS ARE IN INCHES & [mm]
FRACTIONAL
1/8[3mm]
ANGULAR:MACH
1.0 BEND
1.0 [.5 m]
TWO PLACE DECIMAL
.03[.8mm]
THREE PLACE DECIMAL
.015[.4mm]
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DOCUMENT IS THE SOLE
PROPERTY OF THE MANUFACTURER.
ANY REPRODUCTION IN PART, OR
AS A WHOLE, WITHOUT THE WRITTEN
PERMISSION OF MANUFACTURER, IS
PROHIBITED.
16"
10"
74 1/4" MIRROR DIMENSION
50"
MIRROR DIMENSION
29 1/8"
29 1/8"
4 1/2"
35 1/2"
19" LCD
SCREEN
1" LIFT-OFF
CLEARANCE
NEEDED TO
MOUNT UNIT
1 7/16" TOTAL
UNIT DEPTH
3/4" IN
WALL DEPTH
11/16" OFF
WALL DISTANCE
3/16"
1"
POLISHED STAINLESS
MIRROR CLIPS
C-R-7450-19.2-EN-NI 74-1/4"(W) x 50"(H) Custom Recessed TV Mirror with 19" LCD and Enhanced Glass
Beyond Audio Video
8045B.10.18.10
18OCTOBER2010
HIS "C"
Sales Order / Inv. Number
Item and Description
Date Created
Reseller
SHEET 1
SIGNATURE
AND DATE
REQUIRED
FRONT VIEW
SIDE VIEW
DATE:
SIGNATURE:
NOTE:
PLEASE SIGN AND DATE THIS PAGE BEFORE RETURNING TO SEURA. ONLY THIS PAGE NEEDS TO BE
RETURNED. BY RETURNING THIS SHEET, YOU ARE AGREEING TO ALL DIMENSIONS SHOWN ON ALL DRAWING
SHEETS. FOR CUSTOM UNITS, WE WILL NOT START THE BUILD PROCESS WITHOUT AN AUTHORIZED SIGNATURE.
FOR DRAWINGS THAT REQUIRE REVISIONS: SEND THE REVISIONS TO SEURA ON THE ORIGINAL DRAWINGS.
DO NOT SIGN UNTIL ALL REQUIRED DIMENSIONS ARE VERIFIED AND ACCEPTED.
AFTER THE DRAWINGS ARE UPDATED, A REVISED DRAWING PACKAGE WILL BE RE-SENT FOR SIGNATURE.
TOLERANCES
DIMENSIONS ARE IN INCHES
FRACTIONAL 1/8 [3mm]
ANGULAR:MACH 1.0
BEND 1.0 [.5 m]
TWO PLACE DECIMAL
.03 [.8mm]
THREE PLACE DECIMAL
.015 [.4mm]
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DOCUMENT IS THE SOLE
PROPERTY OF THE MANUFACTURER.
ANY REPRODUCTION IN PART, OR AS
A WHOLE, WITHOUT THE WRITTEN
PERMISSION OF MANUFACTURER, IS
PROHIBITED.
www.seura.com
1.800.95.SEURA
PH. 920.857.9069
FAX 920.857.9490
