13
Scan the bar code below to restore factory default settings:
Scan the bar code below to set sleep time
Note: The two digits after TIME are the sleep time, unit: minutes
6.4 On-line scan
When HID protocol data capture terminal is connected with the
scanner, the bar code information captured by the scanner will be
automatically output at the input cursor of the terminal.
When SPP protocol data capture terminal is connected with the
scanner, the bar code information captured by the scanner can be
transmitted to the specified text interface.
6.5 Off-line scan
6.5.1 Storage
When the scanner is not connected to any mobile computer, the bar
code in TXT text is stored in the scanner's built-in storage space.
6.5.2 Export
