SETTOPSURVEY, S.L. Bofarull 14, 08027 Barcelona (Spain) Phone: (+34) 93 340 05 73 Fax: (+34) 93 351 95 18 www.settopsurvey.com
18
Turn on Settop M1
When you received SETTOP M1 for the first time, it is necessary to set a minimum setting. You can follow
this setting Step by Step:
Configuring via Wi-Fi
•
Step 1:
Connect Power Cable (
Ref. 310508
) in COM 1 or COM2, or internal battery (
Ref. M1-Rover-Battery)
•
Step 2:
Press the
ON/OFF
button and wait until the OS Boots Up. Wi-Fi LED flashes modulate (see diagram in
section 1.4
Settop M1 Scheme
) when searching for a network and Wi-Fi LED flash 2 times per second when
it is in adhoc mode. If the receiver has been misconfigured and wants to reconfigure in ad-hoc mode, you
must press the
ON/OFF
button for 3 times.
•
Step 3:
With a PC, iPhone or iPad with Wi-Fi Access, press “
search network”
. It will appear as one network called
“
Settop M1 SN”
(SN is a serial number).
•
Step 4:
Enter Network password “
adhoc
”.
•
Step 5:
Open your Internet browser (it supports Google Chrome and Safari) and key in IP address
192.168.2.2
•
Step 6:
User name is:
admin
Password:
m1
Configuring via PHONE
•
Step 1:
Connect Power Cable (
Ref. 310508
) in COM 1 or COM2, or internal battery (
Ref. M1-Rover-Battery)
•
Step 2:
Press the
ON/OFF
button and wait until the OS Boots Up. Phone LED flashes constantly (one or two times
per second) (see diagram in section 1.4
Settop M1 Scheme
).
•
Step 3:
With a PC, iPhone or iPad, open your Internet browser (it supports
Google Chrome and Safari)
and key in
static
IP address assigned
at SIM card.
•
Step 4:
User name is:
admin
Password:
m1
NOTE:
If you use a Windows 8.1, you need to configure your operating system (see FAQ -
I use
Windows 8.1, can I connect with Settop M1?
)
Содержание M1
Страница 1: ...Settop M1 USER MANUAL v 2 March 2018 ...
